Tenergy Universal Smart Charger for RC/ Airsoft Battery/ NiMH/NiCd Battery Packs (6V – 12V)




buy now



Features and Benefits:
Best Charger for charging all RC Car, RC Airplane and Airsoft battery packs 6V, 7.2V, 8.4V, 9.6V, 10.8V and 12V.
Patent pending watchdog technology provides maximum safety.
Charging Current 1A for battery packs with capacity from 1000mAh -1800mAh.
Charging Current 2A for battery packs with capacity above 2000mAh.
Smart Charger with automatic voltage detection.
Temperature sensor to protect battery pack from over heating.
Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack’s cycle life.
Red LED will be on during charging.
Automatically charging ending with negative delta V.

Accessories Included:
1 standard Tamiya connector with Temperature Sensor.
1 adapter from standard Tamiya to Mini Tamiya.
1 adapter from standard Tamiya to a pair of alligator clip.

Smart Charger Specifications:
Input: AC 100-240V
Output: 6-12V, 1A or 2A

Operating Instructions:
1. Connect battery pack to output connector and plug AC power source
2. Make sure battery polarity is connected correctly (Red wire is positive)
3. Charger will detect battery voltage automatically, Red LED will be on during charging
4. When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on
5. Battery will be charged at 1A or 2A constant current (changed by switch)
6. Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery
7. The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V for RC car/Air and Air soft gun
8. Don’t charge battery packs with voltage less than 6V or greater than 12V and capacity smaller than 1000mAh or larger than 5000mAh
9. Battery pack must be made by high drain current cellUniversal Smart Charger from Tenergy
Smart Charger for any NiMH/NiCD battery packs from 6V-12V (5-10 cell pack)
100-240V AC input for worldwide voltage support
Uses Pulse and negative pulse technology. Automatic Cut-Off
Two current levels, 1.0A and 2.0A are selected by a switch